Home> Featured Products > Machinery > Indirect Oil Hydraulic Extrusion Press

We can offer the following Machinery for immediate sale.

Manufacturer: Kobe Steel, Ltd. (Japan)
Type: Oil Hydraulic Indirect Horizontal Extrusion Press With Both Walking Beam
Cooling Table For Straight Lengths And 16 Station Coiling Baskets For Coils.
Year Of Manufacture: 1985
Use: For Indirect Extrusion Of Rod And Section Of Copper, Copper Alloy and Aluminum Alloy
Type: Horizontal, 4 Columns, Single Acting, Oil Hydraulically Operated, Short Stroke Type (Without Hot Scalper)
Nominal Extrusion Force: 2100 MT (@ 250 kgf/cm2)
Container Size: 210mm (8 1/4") I.D., 1050mm (41.4") Length
Extrusion Speed: Max. 40mm/Sec. (1.57"/Sec.) Adjustable At Up To 95% Of Nominal Extrusion Force
Billet Size (Cold): 203mm (8") O.D., 600mm-950mm (24"- 37.5") Length
Inner Diameter Of Die-Stem Sleeve (Extruded Products Pass Through The Inside Of The Die-Stem Sleeve) For 210mm (8 1/4")
Container: 80mm (3.15") Estimated Dead Cycle Time In Case Of 950mm
Billet Length For Brass Extrusion: 60 Sec., For Aluminum Extrusion: 35 Sec.
Note: Dead Cycle Time Does Not Include The Time Affected By Extrusion. Conditions Consisting Of Upset, Extrusion, Decompression, and the Time
Necessary For Die Alternating Cycle, Gag Block Cooling and Product Pushing.

A. Main And Side Cylinders:
Main Ram Advancing Force: 1660 mt X 1
Side Piston Advancing Force: 110 mt X 2
Side Piston Returning Force: 55 mt X 2
Stroke Usual: 1250mm (50")
Stroke Maximum: 1490mm (58.7")

B. Container Shifting Cylinders:
Closing Force: 105 mmt X 2
Opening Force: 50 mt X 2 (Differential Circuit)
Stroke Usual: 1490mm (58.7")
Stroke Maximum: 1550mm (61")

C. Hydraulic Butt Shear Cylinder:
Shearing Force: 105 mt X 1
Stroke: 610mm (24")

D. Container Locking Cylinders:
Locking Force: 105 mt X 2
Stroke: 2240mm (88")

E. Other Devices:
Container Locking Device
Container Heater
Die-Stem Fixing Device
Jammed Billet Containing Device
Billet Loader
Billet Pushing Device
Die Handling Robot Abb Foundry-Capacity 2200 Kg (4900 Lbs.)
Cleanout Disk Handling Robot
Die Changer
Discard Transporting Conveyor
Product Pusher
Gag Block Cooler
Die Spray Device
Stroke Indicator For Main Ram
Limit Switch Devices
Special Tools For Assembly And Disassembly
Foundation Bolts
Extrusion Tools Except Die And Die Backer
Oil Hydraulic Power Unit
Centralized Lubrication Unit

Oil Hydraulic Power Unit:
Type: Pump Direct Drive
Reservoir Capacity: Approximately 15,000 Liter (3962 gal.)

A. Main Pumps:

(Mpu-2, 3, 4, 5):
Type: Axial Plunger Type
Delivery: 465 l/min. (122 gal./min.)
(Variable Delivery) X 4 Sets

Control System For Variable Delivery: Oil Hydraulic Servo System
By Pressure Relief Valve With Proportional Solenoid.

Pressure: Maxium 250 kgf/cm2
Revolution: 970 rpm

(Mpu-1)
Type: Axial Plunger Type
Delivery: 230 l/min. (Variable Delivery) X 1 Set
Pressure: Maximum 250 kgf/cm2
Revolution: 970 rpm

B. Auxiliary Pumps:

(Apu-1)
Type: Axial Plunger Type
Delivery: 20 l/min. (5.3 gal./min.)
(Fixed Delivery) X 1 Set
Pressure: 250 kgf/cm2
Revolution: 970 Rpm

(Apu-2)
Type: Vane Pump Type
Delivery: 110 l/min. (29 gal./min.)
(Fixed Delivery) X 1 Set
Pressure: 140 kgf/cm2
Revolution: 1450 rpm

(Apu-3)
Type: Vane And Double Pump Type
Delivery And Pressure: 200 l/min. (53 gal./min.)
X 70 Kgf/Cm2 X 1 Set
126 l/min. X 50 kgf/cm2 X 1 Set
Revolution: 1450 Rpm

C. Circulation Pump:
Type: Vane Pump Type
Delivery: 203 l/min. (53.6 gal./min.)
(Fixed Delivery) X 1 Set
Pressure: 30 kgf/cm2
Revolution: 1450 rpm

Main Hydraulic Pump Motors:

A. Main Hydraulic Pump:

(Mpu-2, 3, 4 & 5):
Quantity: 4
Size: 200 Kw, 400 Volt, 985 rpm,
350 Amps, 3 Ph., 50 Hz

B. Hydraulic Pump:

(Mpu-1):
Size: 100 Kw, 400 Volt 985 rpm, 3 Ph., 50 Hz

Billet Heating System:

Cold Billet Load Station:
Gravity Roll Conveyor: 990mm (39") Wide X 2133mm (84") Long

Billet Elevator To Furnace Entry Level
Hydraulic Billet Pusher
Furnace Manufacturer: Banyard (U.K.)
Type: Induction Billet Heater
No. Of Furnace Zone: 3
Max. Operating Temperature: 600 Deg. C. (1112 Deg. F.)
Powered Rollers At Furnace Exit
Driven Rolls To Transport Billet To Load Station

Straight Length Runout System:

Manufacturer: Haginger G.M.B.H (Germany)
Length Of Runout Table: 24.2M (80 Ft.)
Size Of Walking Beam: 1.8M (70") Wide X
Cooling Table: 50M (165 Ft.) Long
Water Quench Tank
Exhaust System
Driven Roller Table To Saw

Coiling Station:
No. Of Coiling Baskets: 14
Driven Carrousel Storage System
Water Quench System
Coil Upender
4-Arm Coil Turnstile
Basket Size: 610Mm (24") I.D. X 1180Mm 46") O.D.

Rod Cutting Saw:
Location: Fed From Straight Length Walking Beam Conveyor
Driven Entry Roller Table
Hydraulic Clamp
Discharge Rack
Swarf Extraction System
Rod Weighing System

Indirect Extrusion Press Pic 1, Indirect Extrusion Press Pic 2, Indirect Extrusion Press Pic 3, Indirect Extrusion Press Pic 4, Indirect Extrusion Press Pic 5, Indirect Extrusion Press Pic 6, Indirect Extrusion Press Pic 7, Indirect Extrusion Press Pic 8, Indirect Extrusion Press Pic 9

Click here to send your offer.