|
|
 |
|
|
 Currency
Converter
Shipment
Tracker
Conversion
Tables
Newsletter
FAQs
Members
|
|
Home> Featured Products > Machinery >Used High Reverce Type Cold Rolling Mill
We can offer the following Machinery for immediate sale.
Used 6-High Reverse Type Cold Rolling Mill
| Maker (Mechanical Part): |
Museok o-ya machinery Co.,Ltd |
| (Electrical part): |
Mukseok HaeJun electric automatic Co.,Ltd. |
| Year: |
Sept, 2004 |
| Type for mill: |
6 high reverse Cold rolling |
| Major equipment: |
Payoff reel, Feed leveler, Reverse Tension Reel |
| |
Main Mill with AGC(Gamma-ray type), Hydraulic |
| |
Controller, Electric controller |
Basic Data
| Initial material: |
Hot rolled steel strip coil(Q195,Q235, SPCC, SPCD, SPCE<SS,S35C) |
| Thickness: |
0,2mm - 3,5mm |
| Width: |
400 - 650mm |
| Coil I,D & O,D: |
508mm / 1600mm |
| Weight: |
Max 10,000kgs |
| Mill Specification |
|
| Roller for work: |
160mm diameter |
| Roller for Intermediate: |
250mm diameter |
| Roller for back-up: |
680mm diameter |
| Roll barrel length: |
800mm |
| Rolling force: |
7,000KN |
| Threading speed: |
15M/Min |
| Rolling speed: |
Max 240M/Min |
| Winding Tension: |
10KN - 100KN |
| Available regrinding diameter: |
Min 150mm diameter for work roller |
| |
Min 240mm diameter for Inter roller |
| |
Min 650mm diameter for Back-up roller |
| Shift distance for Inter roller: |
150mm |
| Opening space for work roller: |
Max20mm |
| Pass Line height: |
FL+ 900mm |
| Hydraulic pressure: |
Mill roll control - 12-18Mpa |
| |
Auxiliary actuator - 10Mpa |
Equipment Specification
| Screw down type: |
Hydraulic control type |
| Material for roller: |
9Cr2Mo with heat treated |
| Roller control: |
Work roller = Bending system control |
| |
Intermediate roller = Shifting system control |
| Bearing lubrication: |
Oil mist spray type |
| Roll changing system: |
Quick changing system |
| Stand area: |
420mm x 520mm |
| Main roll (Intermediate roller)drive: |
1,000kw x 660volts x 1set |
| Main drive reducer: |
1/3,55 ratio Gear reducer |
| Drive connector: |
Universal joint connected |
| Mill guide: |
Side guide, mill strip guide, oil mist, Gama-ray |
| |
Gage and tension controller |
| Tension reel: |
Hydraulic control over hung mandrel type drum with coil car |
| |
510mm x 800mm |
| Reel motor: |
450kw x 440volts x 1200/400 RPM |
| Pay off reel: |
Hydraulic control over hung mandrel type drum |
| |
with coil car |
| Reel motor: |
160kw x 440volts x 1200/400 RPM |
| Reel shifting: |
Hydraulic control |
| Auxiliary part |
|
| Motor: |
380volts x 60hz |
| Thickness gage: |
QNT-4 type 2 sets |
| DC drive unit: |
EUROTHERM 590 SERIES |
| Control PLC: |
SIEMENS S-7 2SETS |
Click here to send your offer.
|
|
| |
|
|
|
| |
World of Steel® is a Registered Trademark in USA and some countries |
|
